Equipment introduction:
Full-automatic plane mask machine one tow two production lines, by the mask body machine, ear belt welding machine, the splitter .This production line realizes the full automatic production of plane mask, mainly including the technologies of coil material feeding, folding and pressing, nose bridge and rib feeding, mask shaping, mask cutting, ear strap material and welding, and finished product blanking, etc., to complete the whole production process from raw material to finished mask.
Technical parameters of equipment:
|
Technical parameters |
||
|
Number |
Name |
Parameters |
|
1 |
Name |
1+2 full automatic plane mask making machine |
|
2 |
Model |
BLDKZJ-SY02 |
|
3 |
Ultrasonic system |
15/20khz |
|
4 |
Power |
13kw |
|
5 |
efficiency |
60-100pcs/min(Under normal production condition) |
|
6 |
Voltage and frequency |
220V 50/60hz |
|
7 |
Weight |
1200kg |
|
8 |
Size |
6500(L)mm*3600(W)mm*2000(H)mm |
Plane mask production process:
1) stack the three layers of non-woven materials together through the machine
2) roll the hem and put the nose in
3) a large piece of non-woven cloth is gradually narrowed from left to right along the inclined plane to make a "folding structure".
4) pressing: press and flatten the surface of the mask
5) automatic single cutting and seaming of the mask
6) re-use non-woven cloth, and repair the edge of the mask
7) cutting and trimming again
8) through the way of hot pressing, fixed hanging ear rope
9) finally pass quality inspection, sterilize and package the finished product
